North Rockhampton covers the city's whole north side, from the post-war fibro and brick veneer of Berserker and Kawana through to the slab-on-ground estates going in at Parkhurst. Rockhampton Custom Cabinets builds kitchens, robes, vanities and laundries to measure for all of it, which matters because those two kinds of house need opposite things: an older north-side home needs cabinetry scribed to walls that are not plumb, and a new estate home needs the storage the builder's standard range left out. Carcases are specified in moisture-resistant board with sealed cut edges, because most of the region's 717 millimetres of annual rain falls in a humid summer. Every job is measured on site, built locally and installed by the same team. Quotes are free and itemised in writing. Call 0485 032 128.
GET A FREE QUOTE

OUR STORY
The range below is what gets built for a north-side house, made to the measured room rather than ordered in standard module sizes.
Kitchens are the largest job on the north side, and in a post-war house the brief is usually to open a closed kitchen into the living area as well as replace it. Laundries and bathroom vanities use the same moisture-resistant carcases and are often done in the same visit, which saves a second measure and a second install. Where a house is being renovated room by room, the finish is recorded so the next room matches rather than nearly matches.
Built-in robes are made to the opening, with sliding doors where a bedroom is tight and hinged doors where the floor allows the swing. Linen cupboards, under-stair pull-outs and garage shelving use the same carcases. In a post-war house the robe opening is rarely a standard width, which is the whole reason a built-in beats a kit: the leftover 300mm becomes storage instead of a filler panel.
Benchtops are quoted in compliant surfaces only: laminate, natural stone, porcelain and sintered surfaces, or solid timber. Engineered stone cannot lawfully be supplied or installed anywhere in Australia. Where the cabinet boxes are sound and only the fronts are dated, replacing the doors and the top changes the room for a fraction of a new kitchen, and that is checked before a full replacement is quoted.
A measure happens at the house. Wall lengths, floor level, window reveals and the existing plumbing and power positions are recorded, appliances are measured where they are being kept, and board and finish samples are left in the room to be seen in its own light. The quote is itemised and written, and nothing is cut until the drawing is signed.

SERVICES WE OFFER IN North Rockhampton
Rockhampton records about 717 millimetres of rain a year and a January mean maximum of 32.6 degrees, with the rain heavily concentrated in summer: around 104 millimetres in January against 30 to 37 millimetres a month through winter. The north side also spans three distinct housing eras, and each one changes the job.
A wet season concentrated into a few months means a house takes a sustained humid period rather than an even average, and that is when an unsealed cut edge beside a sink, a dishwasher or a laundry tub takes up moisture and swells. Carcases are specified in moisture-resistant board, cut edges are sealed, edge banding is heat-sealed to the panel, and the base of a sink or tub cabinet is lined. None of that is expensive and all of it decides how a cabinet looks in year ten.
Much of the north side is post-war fibro and brick veneer, which means standard ceiling heights, mostly square rooms, and kitchens built to a 1960s or 1970s plan with a separate dining room. The cabinetry opportunity there is layout as much as finish: removing an overhead run to open a servery, or taking cupboards to the ceiling to recover the storage that the original kitchen put in a walk-in pantry. The walls are square enough that the work is predictable.
Parkhurst is the city's northern growth front, with the Northridge, Edenbrook and Riverside estates and the Ellida Estate launched in February 2025 on Bruce Highway frontage, bringing roughly 263 lots across its first six stages and up to about 1,000 lots across 117 hectares around 10 kilometres north of the CBD. Those houses are square and slab-on-ground, so cabinetry fits predictably, and the demand is for what the builder's range did not include: a walk-in pantry, taller overheads, better drawers.


Why choose us in North Rockhampton
The north side is minutes from the workshop, which changes what is possible on a job rather than just what it costs.
The person who measured the room works for the business that builds the cabinetry and installs it, so a wall that turns out not to be square is somebody's responsibility rather than an argument. Licensed plumbing and electrical trades are booked against the install date instead of being left to the household. A remake, if one is needed, is days rather than weeks because the workshop is in the same city.
The nearest IKEA store is roughly 600 kilometres south near Brisbane and the Kawana address is a click-and-collect collection point rather than a showroom with a kitchen planner. Flat-pack from a local range is a legitimate choice in a square post-war room with standard appliances, and it gets recommended where it fits. Made-to-measure earns its price where the opening is an odd width, where the storage has to be designed, or where the walls have moved.
Rockhampton Custom Cabinets holds public liability cover to $20 million and trades under ABN 56 573 390 615, both checkable. Board thickness, edge sealing and hardware ratings are named in the quote rather than described as quality materials. Runners are specified to carry around 40 kilograms and hinges rated beyond 100,000 open-and-close cycles. The measure and the quote cost nothing.

SERVICES WE OFFER IN North Rockhampton
The north side is defined by its spine roads and by the bridges that connect it to the city, and the housing changes along each one.
Musgrave Street is the north side's main commercial spine, running from the Fitzroy Bridge out towards Moores Creek, with Northside Plaza at the corner of Musgrave and High Street. The streets either side of it hold a dense mix of post-war housing and older timber homes, much of it rental, and the cabinetry work there is frequently a value fit-out between tenancies rather than a full custom kitchen.
Yaamba Road runs north through Norman Gardens, with Stockland Rockhampton at 331 Yaamba Road and CQUniversity's Rockhampton campus at 554 to 700 Yaamba Road. The housing around it is the city's mortgage belt, and the work is typically a full kitchen or a fitted robe in a house the owners intend to stay in rather than a refresh before selling.
Moores Creek Road at Park Avenue is the north landing of the Neville Hewitt Bridge. Three crossings tie the north side to the CBD: the Alexandra Railway Bridge of 1899, the Fitzroy Bridge of 1952, which was for decades the only road crossing, and the Neville Hewitt Bridge of 1980 carrying the Bruce Highway. That 1980 crossing is what unlocked the post-war northern expansion, which is why the housing eras sit in bands moving north.


Why choose us in North Rockhampton
Kitchens are the biggest job on the north side and they split cleanly into two briefs, because the housing does.
A 1960s or 1970s north-side kitchen is usually a separate room with a door, a window over the sink and a bank of overheads on every wall. Replacing it is often an opportunity to remove one overhead run and open a servery or a full opening to the dining area, which changes the house more than any finish does. The rooms are square, so the cabinetry is predictable, and the money goes into layout and storage rather than into scribing.
In a new estate house the kitchen is already square and already plumbed, so the work is about what the builder's standard range left out. That is usually a walk-in or butler's pantry, overheads taken to the ceiling instead of stopping at a bulkhead, deep pot drawers in place of shelved cupboards, and a bin pull-out. Those are modest additions when the house is new and expensive ones later.
A butler's pantry works when it holds the mess rather than repeating the main kitchen: bench at working height, power for the kettle and toaster, open shelving for daily items and a door that closes on all of it. Where there is no room for one, an appliance cupboard with a lift-up door, an internal power point and a pull-out shelf does the same job in a 600 millimetre cabinet and keeps the benchtop clear.

SERVICES WE OFFER IN North Rockhampton
Small jobs are a large share of north-side work, and they are quoted properly rather than treated as filler between kitchens.
A single cupboard, a bathroom vanity, a bank of drawers to fit one gap, a bench seat with storage beneath it: each is measured and quoted per piece. Repairs cover what is not worth replacing, such as a swollen cabinet base under a leaking tap, failed drawer runners, or a door that no longer sits to an even reveal. A pull-out added into an existing 300 millimetre gap is among the cheapest and most useful jobs available.
Adding to cabinetry already in the house is harder than replacing it, because colour, profile and sheen all have to line up and existing doors have faded. The profile is measured off the original, the colour matched against a door taken off the house rather than a sample card, and the sheen matched separately from the colour. Where an honest match cannot be achieved, that is said, because a near-match draws the eye more than a deliberate contrast.
Where the boxes are square and sound and the layout still works, new doors, drawer fronts, handles and hinges transform a kitchen for a fraction of a rebuild. The carcases are checked first, particularly the base of the sink cabinet, because in this climate that is where a cabinet fails. Where a carcase has gone, that is reported with the reason rather than covered with a new front.


Why choose us in North Rockhampton
Outside the kitchen, the same carcases and the same hardware build the rest of the house.
A built-in robe is made to the measured opening, and the interior is planned around what the household actually hangs and folds rather than a single rail and one shelf. Double hang roughly doubles capacity for shirts and children's clothes; long hang at about 1,500 millimetres takes coats and dresses. A closed robe in a humid summer holds moisture against fabric, so a vent in the door or a gap at the top is specified rather than left out.
A vanity is built to the opening, which in a post-war bathroom is rarely a catalogue width of 600, 750 or 900 millimetres. The bowl cut-out and the waste penetration are sealed, the cabinet base lined and the kickboard sealed and removable so a slow leak shows on the floor rather than soaking into board. A mirror cabinet above returns the storage the bowl takes out of the cabinet below.
A laundry takes more water than any room except the bathroom. Tub cabinets are built in moisture-resistant board with the cut-out sealed and the base lined, and a bench run over front-loading machines turns the room into somewhere washing can be folded. A pull-out hamper, a drying rail and a broom cupboard with an internal power point for a stick vacuum are the three additions that get used every day.

Made-to-measure kitchens built for Rockhampton homes, from Queenslander renovations to new Gracemere builds. Moisture-resistant board, soft-close hardware and a choice of finish, measured, built and installed by the same local team.

Custom laundry cabinets built to fit your room, not a flat-pack's fixed sizes. Overheads, broom cupboards and benchtops that hide the washer and dryer, all in moisture-resistant board made for Rockhampton's humid summers. Local, fully insured and built to last.

Built-in wardrobes made to measure for the bedroom, with a proper interior fit-out instead of a single rail. Hinged or sliding doors, mirror options and drawers, scribed wall to wall so no gap is wasted. Local, insured and built by the same team.

Walk-in wardrobes designed as a proper dressing room, with hanging, drawers, shoe walls and an island bench where space allows. Full custom, built around how you dress and finished to leave the door open on. Local, insured and made to measure.

Custom bathroom vanities built for real bathrooms, with storage and basin styles to suit and the plumbing worked around rather than into. Moisture-resistant construction and sealed cut-outs for a humid climate. Compliant benchtops only, no engineered stone. Local and insured.

Bespoke built-in joinery for the pieces a flat-pack cannot do: bookshelves, window seats, bar units, display cabinets and feature walls, scribed to a Queenslander's out-of-square walls and finished in laminate, timber veneer or durable two-pac by the same Rockhampton team.

Custom TV and entertainment units built around the screen and the AV gear: floating consoles, full floor-to-ceiling media walls and fireplace features, with proper ventilation, concealed cabling and dead-level installation by the same Rockhampton team.

Custom home office cabinetry built around how the work happens: fitted desks at the right height, document and filing storage, overhead units and hidden cable management, scribed to fit a study, alcove or hallway nook by the same Rockhampton team.

Whole-home custom storage that captures dead space: linen cupboards, mudroom drop zones, under-stair and laundry storage, garage and utility systems, scribed to fit and built with full-extension soft-close hardware by the same Rockhampton team.

Compliant benchtops only: laminate, natural granite and marble through licensed stonemasons, porcelain and solid timber. No engineered stone, ever. Tops are templated on site, the stonemason is coordinated and every cut-out is sealed square, so the bench performs in a humid Rockhampton kitchen.

Commercial shopfitting and joinery for retail, offices, cafes and hospitality: counters, display, shelving, reception and back-of-house. Built commercial-grade, installed around your trading hours and lease deadline, so your tenancy opens on time and stands up to real foot traffic.

Refacing swaps the doors, drawer fronts, panels and hardware onto sound existing carcases, a cost-effective update rather than a full rebuild. The carcases are assessed honestly first: where the boxes are solid it transforms a kitchen for a fraction of a replacement.



Custom Cabinetry In North Rockhampton
Published regional Queensland guides put a mid-range kitchen renovation at roughly $27,000 to $48,600, with the custom cabinetry component commonly $12,950 to $37,800, and a cosmetic refresh keeping the carcases at about $8,650 to $21,600. Australian guides put built-in wardrobes at roughly $1,110 to $3,010 per linear metre and a vanity supplied and installed at about $450 to $3,150. Those are guide ranges rather than a measurement of this market, so a written quote after a free on-site measure is the accurate figure.
Usually yes. Post-war fibro and brick veneer houses through Berserker, Norman Gardens and Kawana have mostly square rooms and standard ceiling heights, so cabinetry fits predictably and there is far less scribing. The bigger opportunity in those houses is layout rather than finish: removing an overhead run to open a servery into the dining room, or taking cupboards to the ceiling to recover storage the original plan put in a pantry.
The house is square and already plumbed, so the work is about what the builder's standard range left out rather than about fitting an awkward room. That is usually a walk-in or butler's pantry, overheads taken to the ceiling instead of stopping at a bulkhead, deep pot drawers instead of shelved cupboards, and a concealed bin pull-out. Those additions are modest while the house is new and considerably more expensive to retrofit later.
Because the region's rain is concentrated in summer: about 104 millimetres in January against 30 to 37 millimetres a month through winter, inside an annual total of roughly 717 millimetres, with a January mean maximum of 32.6 degrees. A sustained humid period is when an unsealed cut edge beside a sink, dishwasher or laundry tub takes up moisture and swells. Moisture-resistant board, sealed cut edges, heat-sealed banding and a lined sink-cabinet base are the standard specification here.
Yes, and they are a large share of north-side work. A single cupboard, a vanity, a set of drawers built to fit one gap, or a pull-out added into an existing 300 millimetre space are each measured and quoted per piece. Repairs cover a swollen cabinet base under a leaking tap, failed drawer runners or a door that no longer sits to its reveal. Where a repair is not the better value, that is said rather than quoted anyway.
Often yes, and it is the best-value kitchen job available when it applies. Where the boxes are square, the layout still works and the base under the sink has not swollen, new doors, drawer fronts, handles and hinges change the room for a fraction of a rebuild. The carcases are checked first and the finding is reported either way, because new doors hung on a cabinet that has moved will never sit to an even reveal.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 7:00am - 9:00pm
Mon: 7:00am - 9:00pm
Tue: 7:00am - 9:00pm
Wed: 7:00am - 9:00pm
Thu: 7:00am - 9:00pm
Fri: 7:00am - 9:00pm
Sat: 7:00am - 9:00pm