A home office only works if the desk is the right height, the screen is the right distance and the cables are somewhere other than the floor. Rockhampton Custom Cabinets builds home office cabinets to the measured room: a desk run with a return where the wall allows it, overhead shelving above, filing and printer storage below, and a cable tray behind so nothing hangs. Carcases are specified in moisture-resistant board, which matters where paper and equipment are stored in a city averaging a humid subtropical summer. Most study jobs in Rockhampton are one of three things: a nook carved out of a living area, a spare bedroom turned into a working room, or one room shared by two people working from home. Each is measured and drawn before anything is cut. Every quote follows a free on-site measure. Call 0485 032 128.
GET A FREE QUOTE
Rockhampton Custom Cabinets

A home office is a desk, the storage around it and the services behind it. The six elements below are what gets built.
A fitted desk runs the full width of the wall it sits on, which means no gap at either end and a work surface that is as deep as the room allows rather than as deep as a flat-pack top comes. A return along the adjacent wall adds a second surface for paperwork or a printer without adding floor area. A corner workstation suits a square room where the window is on one wall, because it puts the screen out of the glare. Depth is usually 600mm to 700mm, which is covered under monitor distance below.
Shelving above a desk uses the wall a bought desk leaves empty, and in a Rockhampton study with a high ceiling that is often a metre of unused height. Shelves are set adjustable so the same unit holds folders in one bay and books in another, and the lowest shelf is kept at least 400mm above the desk so there is room to work under it. A hutch, meaning a shallow cabinet sitting on the desk surface, suits a room where fixing to the wall is not possible.
A filing drawer is a specific thing: deeper than a standard drawer and fitted with a rail that suspends foolscap or A4 folders. Where a household still keeps paper records, one or two filing drawers under the desk solves it. A printer is better in a pull-out than on a shelf, because a pull-out lets paper be loaded and jams cleared without lifting the machine. Scanners, shredders and document boxes are sized into the plan at the measure rather than found a home afterwards.
An office generates clutter that should not be on display: cables, chargers, spare paper, packaging, a laptop dock. Closed cupboards at low level take the bulk of it, and a shallow drawer at desk height takes stationery, which is the single most-used storage in a study. Where the office sits in a living area, closed fronts matter more because the room has to stop being an office at the end of the day.
Two desks in one room need about 1,400mm of width each to be usable, and a shared run across one wall is almost always better than two desks facing each other. A shared overhead shelf and a central bank of drawers between the two positions saves both space and cost. Where both people are on calls, the layout puts the two screens back to back rather than side by side, which reduces how much each person hears of the other.
Melamine is the workhorse finish for a study and the most cost-effective. High-pressure laminate suits a desk surface that takes daily wear. Timber veneer gives a feature to an open-plan study that is visible from a living area. Two-pac polyurethane sprays to a seamless colour-matched finish, which is what lets a study nook disappear into a wall when its doors are closed. A matt finish shows fingerprints less at hand height than a gloss one.


Rockhampton Custom Cabinets

Rockhampton Aero records about 717mm of rain a year, most of it in summer, and a January mean maximum of 32.6 degrees (Bureau of Meteorology, station 039083). A study stores paper and runs equipment, and both react to that.
Carcases and shelving are specified in moisture-resistant board rather than standard particleboard, with every cut edge sealed and banding heat-sealed to the panel. Paper takes up moisture from humid air and gains weight, so a shelf loaded with document boxes carries more than it appears to and is specified or supported accordingly. Where a cabinet sits against an external wall, a gap behind the carcase lets air move instead of trapping it, which also matters for anything electronic stored in there.
A desk surface gets leaned on, written on and has a laptop dragged across it every day, so the top is specified for wear rather than appearance. High-pressure laminate with a sealed, moisture-resistant substrate is the sensible default. Solid timber suits a feature desk and needs an oiled or two-pac finish maintained over time. Edges are detailed with a radius rather than a sharp arris, because a square edge at forearm height becomes uncomfortable within an hour.
Runners are specified to carry around 40kg, and a filing drawer full of paper is one of the heaviest drawers in a house, so a filing position is specified up to roughly 70kg. Full-extension runners matter more in a study than almost anywhere, because a drawer that only opens two-thirds hides the back third of the files in it. Hinges are rated beyond 100,000 open-and-close cycles. Soft-close is standard, which in a room used for calls is worth more than it sounds.
Boxes are built from 16mm to 18mm board, glued and dowelled rather than screwed through the face, so a desk run stays square and a long shelf line stays straight. Backs are captured in a groove rather than pinned on. Fronts are hung to a consistent reveal of about 2mm, which on a wall of office joinery is what separates a made run from an assembled one. Hinges adjust in three directions so the reveal can be trued after installation.
Rockhampton Custom Cabinets

A study is built around the person using it and the equipment they already own, which is exactly what cannot be ordered at a distance.
The nearest IKEA store sits roughly 600km south near Brisbane, and the Kawana address is a click-and-collect collection point rather than a showroom with a planner. A fitted desk run is cut to the wall, and a wall measured wrong is a remake rather than a return. Cabinetry built in Rockhampton can be remeasured in person and remade in days. Where a desk has to suit a particular chair, screen or printer, those can be measured on site rather than described over the phone.
Rockhampton Custom Cabinets measures, builds and installs the same office joinery, so the person who recorded the wall and the power positions is answerable for the fit. Where data or power points move, a licensed electrician works before the joinery covers the wall, which in Queensland is a legal requirement and is sequenced ahead of the install. A study install is usually a single day.
Twelve years of cabinetry across Rockhampton covers the rooms a study usually occupies: a fourth bedroom in a 1970s lowset, a sleepout or enclosed verandah in a raised timber home, and a dedicated study framed into a new estate build. Public liability cover is held to $20 million and the ABN is 56 573 390 615, both checkable. Board specification, hardware ratings and finish are named in the written quote.


Rockhampton Custom Cabinets

Office joinery is quoted per linear metre like any built-in run. Published Australian guides give the frame below, quoted as that rather than as a Rockhampton measurement.
Five things move the price: the linear metres of desk and storage, how much is closed cupboard or drawer rather than open shelving, the finish, whether a filing drawer and pull-outs are included, and whether power and data have to move. A plain fitted desk with a shelf above is a modest job. A full wall of cabinetry with a filing bank, a printer pull-out and integrated lighting is several times that. Each pull-out and fitting is itemised rather than bundled.
Published Australian guides put custom joinery generally at roughly $800 to $2,000 per linear metre. For built-in floor-to-ceiling runs specifically the same guides give about $1,400 to $2,400 per linear metre at a budget specification, $2,400 to $3,800 mid-range and $3,800 to $6,500 for premium work, where the tiers reflect build tolerance as much as material. Carpenter rates in Brisbane in those guides run $55 to $130 an hour, averaging about $85.
Drawers and doors cost more per metre than open shelving, and a filing drawer with a suspension rail costs more than a standard drawer. After that comes the desk surface, then any lighting, then electrical work if points move. Chairs, screens and equipment are bought separately by the household. The cheapest honest saving in a study is open shelving instead of closed cupboards above the desk; the most expensive late change is relocating a power point after the joinery is fixed.
Rockhampton Custom Cabinets

Three honest options, and for a room whose use is not settled the cheaper two are right.
Built-in joinery uses the whole wall and the whole height, puts the desk at the depth the room allows, and hides the cabling. It is the only option that makes a study nook in a living area look intended rather than improvised. It costs the most and takes weeks rather than a weekend. It earns its price where a household works from home regularly, where the room is awkward, or where the office has to close up and stop being an office.
Flat-pack office furniture is a genuine budget option and works in a square room with a plain wall. Sizes are fixed, so a 2,340mm wall takes a 1,800mm desk and a gap, and the carcase specification is whatever the manufacturer chose. Cable management is usually a hole in the back panel. For a study used occasionally, or in a rented house, this is frequently the sensible call and is recommended as such.
A bought desk costs the least, arrives now and moves house. What it gives up is the wall above it, the fit against a skirting board, any integrated storage and any cable management. In a spare room used for a few hours a week, that is enough. Where somebody works from home most days, the difference between a bought desk and a fitted run shows up in the back and in the clutter within a few months.


Rockhampton Custom Cabinets

The four decisions below are what make a study comfortable, and all of them are set before the cabinetry is drawn.
A seated desk surface sits between about 720mm and 750mm off the floor for most adults, which is lower than a kitchen bench and noticeably lower than many bought desks. Too high and the shoulders lift; too low and the wrists bend. Where a household wants a standing option, a section of the run is built at about 1,050mm to 1,100mm, or a sit-stand mechanism is allowed for in the carcase. The height is set from the person who will use it, measured at the quote.
A screen should sit roughly an arm's length away with the top of the display at or just below eye level. On a 600mm deep desk a 27-inch monitor ends up too close, which is the most common complaint about a fitted study. A desk depth of 700mm solves it, or the screen goes on a monitor arm clamped to the back edge, which also frees the surface underneath. Where depth is limited, the arm is planned for and the back edge is detailed to take the clamp.
Power and data points are brought out behind the desk at surface height rather than at skirting height, so nothing has to be reached for behind a cabinet. A cable tray fixed under the back of the desk carries the power board and the slack, which is what keeps the floor clear. Grommets through the desk top let cables pass without being pinched. All wiring is done by a licensed electrician, which in Queensland is not optional.
A window directly behind a screen makes the screen unreadable for half the day, and a window directly in front of it puts glare on the display. Where the room allows, the desk is positioned with the window to one side. Where it does not, the joinery is planned around a blind and task lighting rather than relying on the ceiling light. An LED strip under an overhead shelf lights the desk surface without throwing light at the screen.
Rockhampton Custom Cabinets

Four situations cover almost every home office built in Rockhampton, and each is a different job.
A nook is the most common home office in newer Rockhampton estate homes, where a recess is framed into a hallway or off the living area. The constraint is depth: many nooks are 500mm or 550mm deep, which is below the 700mm a monitor wants, so the screen goes on an arm and the desk is detailed to take it. Closed doors or a sliding panel let the nook shut at the end of the day, which matters when it is visible from the living room.
A spare bedroom is the easiest conversion because the room already has power, a window and a door that closes. The usual plan is a desk run along the wall opposite the window, with shelving above and storage below, and the existing robe retained for storage rather than removed. Where the room must still serve as a guest bedroom, a fold-down bed or a desk run that leaves floor clear is planned from the start rather than retrofitted.
Two workstations in one room is a layout problem before it is a cabinetry problem. A shared run along one wall, each position about 1,400mm wide, with a central drawer bank, uses the space better than two facing desks. Screens are set back to back rather than side by side so each person hears less of the other's calls. Where the room cannot take two positions, a second nook elsewhere in the house is usually the better answer and is said so.
A cupboard office puts the whole study behind doors: a desk surface at 720mm with shelving above, drawers below, power inside and doors that close on all of it. It suits a small home where no room can be given up, and it works best in a recess of about 1,200mm wide and 600mm deep. Ventilation matters if equipment stays plugged in behind closed doors, so a vent path is built in, the same way it is for media cabinetry. For storage beyond the office itself, the same carcases carry into built-in storage.


The first visit is a free, no-obligation measure, recording the room as it actually is and working through how it needs to function. Older Rockhampton homes and Queenslander walls are rarely square, and a commercial tenancy is rarely handed over as drawn, so measuring on site is the only way to get it right. A clear design and a written, itemised quote follow, so the inclusions and the cost are known before anything is ordered. Nothing is built until the plan is approved.

Once the design is approved, the cabinets are made to measure in the Central Queensland workshop. Carcases are built in quality board, including HMR moisture-resistant board for kitchens, laundries, vanities and commercial wet areas, which is the sensible specification in a humid climate. Soft-close hinges and drawer runners are fitted as standard, with hardware such as Blum or Hettich. Everything is prepared and checked before it leaves the workshop for installation.

The same team that built the cabinetry delivers and installs it, so the people who made it are the people fitting it. Installation works cleanly and carefully around a household or a trading business, whether that is a full kitchen in Norman Gardens, a built-in wardrobe in Frenchville or a service counter that has to be in before opening. Benchtops, doors and drawers are aligned and adjusted on the day for a proper finish. The site is tidied before the team leaves.
Published Australian guides put custom joinery at roughly $800 to $2,000 per linear metre generally, and built-in floor-to-ceiling runs at about $1,400 to $2,400 per linear metre at a budget specification, $2,400 to $3,800 mid-range and $3,800 to $6,500 for premium work. A plain fitted desk with a shelf above sits at the bottom of that; a full wall with a filing bank and printer pull-out sits well up it. Those are Australian figures rather than a measurement of this market, so a written quote after a free measure is the accurate number.
Between about 720mm and 750mm off the floor for a seated desk, which is lower than a kitchen bench and lower than many bought desks. Too high lifts the shoulders and too low bends the wrists. Where a standing option is wanted, a section of the run is built at about 1,050mm to 1,100mm or a sit-stand mechanism is allowed for in the carcase. The height is set from the person who will use the desk, measured at the quote rather than assumed.
About 700mm is comfortable, because a screen wants to sit roughly an arm's length away with the top of the display at or just below eye level. On a 600mm desk a 27-inch monitor ends up too close, which is the most common complaint about a fitted study. Where depth is limited, as it is in most study nooks at 500mm to 550mm, the screen goes on a monitor arm clamped to the back edge and the desk is detailed to take the clamp.
Yes, and in a nook that is visible from a living area it is usually worth doing. Doors or a sliding panel close on the desk surface, the shelving and whatever is left out, which lets the room stop being an office at the end of the day. Where equipment stays plugged in behind closed doors, a vent path is built into the cabinet so heat can escape, the same way an equipment bay in a media wall is detailed.
Power and data points are brought out behind the desk at surface height rather than at skirting height, so nothing has to be reached for behind a cabinet. A cable tray fixed under the back of the desk carries the power board and the slack, and grommets through the desk top let cables pass without being pinched. Any wiring work is done by a licensed electrician, which in Queensland is a legal requirement, and is sequenced before the joinery covers the wall.
Usually yes, because two workstations in one room is a layout problem that bought furniture cannot solve. A shared run along one wall, with each position about 1,400mm wide and a central drawer bank, uses the room better than two desks facing each other, and setting the screens back to back means each person hears less of the other's calls. Where the room genuinely cannot take two positions, a second nook elsewhere in the house is the better answer.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 7:00am - 9:00pm
Mon: 7:00am - 9:00pm
Tue: 7:00am - 9:00pm
Wed: 7:00am - 9:00pm
Thu: 7:00am - 9:00pm
Fri: 7:00am - 9:00pm
Sat: 7:00am - 9:00pm