Most houses in Rockhampton have storage space they are not using: the metre under a staircase, the 300mm beside a hallway door, the wall above a car, the roof of a linen cupboard. Rockhampton Custom Cabinets measures those spaces and builds storage into them, from linen cupboards with adjustable shelving to under-stair drawers, garage shelving and pull-outs made for a gap no off-the-shelf unit fits. Carcases are specified in moisture-resistant board, which matters where linen and paper are stored in a city averaging a humid subtropical summer. The work is usually a single cupboard rather than a whole room, and small jobs are quoted properly rather than treated as an inconvenience. Every quote follows a free on-site measure and arrives in writing. Call 0485 032 128 to book one.
GET A FREE QUOTE
Rockhampton Custom Cabinets

Storage inside the house divides into six jobs. Each one is a different cabinet, and most households need two or three of them rather than all six.
A linen cupboard fails for one of two reasons: the shelves are too far apart, so stacks topple, or too deep, so the back half is never reached. Shelf spacing of roughly 300mm to 350mm suits folded towels and sheets, and a depth of 450mm to 500mm keeps everything within reach. Adjustable shelving on 32mm increments means the same cupboard can be reset as a household changes. A shallow top shelf takes spare pillows and the bottom section takes a laundry basket or a vacuum.
The space under a staircase is the largest piece of dead space in most two-storey homes, and the triangle shape is why it usually stays empty. The answer is a set of graduated pull-outs: deep drawers at the tall end, shallower ones as the ceiling drops, and a hinged panel at the low end for long items. Each drawer is cut to the actual rake of the stair, which is measured rather than assumed, because no two staircases are built to the same pitch.
Converting an existing cupboard is frequently cheaper than building a new one and solves the same problem. A single fixed shelf becomes four adjustable ones, a deep cupboard gets a pull-out so the back is reachable, and a bank of internal drawers turns a cupboard into something that actually holds its contents in order. The test applied is simple: if something has to be moved to reach something else, the layout is wrong and gets changed.
Children's storage works when a child can reach it and put things back without help, which means open bins and low shelves rather than high cupboards with doors. A bench with tubs underneath handles toys in a living area and doubles as seating. School bags, hats and drink bottles need hooks at child height near the door the family actually uses. As children grow, the same carcase takes shelves instead of bins, which is designed in rather than rebuilt later.
A tall narrow cupboard, often only 300mm or 400mm wide, holds a broom, a mop and a vacuum cleaner that otherwise stand in a corner of a room. An internal power point lets a stick vacuum charge where it is stored, which is the single most appreciated detail in a cleaning cupboard. A shelf at the top takes cleaning products out of reach of children, and a hook rail on the inside of the door holds the attachments that always get lost.
Where a house has a small room given over to storage, the layout follows one rule: shallow shelving on three walls beats deep shelving on one. Depth of 300mm to 400mm keeps everything visible and reachable; anything deeper becomes a place where items are lost. Floor space is kept clear for the things that cannot go on a shelf. Labelling only works if the shelves are shallow enough that labels can be read without moving anything.


Rockhampton Custom Cabinets

Rockhampton Aero records about 717mm of rain a year, most of it in summer, and a January mean maximum of 32.6 degrees (Bureau of Meteorology, station 039083). Storage is where things sit untouched for months, which is exactly when humidity does its work.
Carcases and shelving are specified in moisture-resistant board rather than standard particleboard, with every cut edge sealed and banding heat-sealed to the panel. Linen and paper take up moisture from the air and gain weight, so a shelf loaded with towels or document boxes carries more than it appears to; shelves are shortened, thickened or supported mid-span based on the run length rather than guessed. A gap behind the carcase lets air move where the cabinet backs onto an external wall.
A sealed linen cupboard holds warm, humid air against fabric for months, and that is how stored linen comes out smelling musty in a Central Queensland summer. The fix is modest: a vent in the door, a gap at the top or bottom, or a louvred panel. Slatted shelves are an alternative that lets air move through the stack. None of it costs much, and all of it has to be decided before the cupboard is built rather than after a problem appears.
A garage in Rockhampton reaches well above the inside temperature of the house and swings further between wet and dry. Cabinetry there is specified accordingly: moisture-resistant board as a minimum, sealed edges throughout, and finishes chosen for a space that is effectively semi-outdoor. Anything stored in a garage that matters is kept in a closed cabinet rather than on an open shelf, because dust and insects are as much of a problem as humidity.
Storage drawers are among the heaviest in a house: a linen drawer, a toy drawer or an under-stair drawer full of tools all load up. Runners are specified to carry around 40kg, and up to roughly 70kg where the contents justify it. Full extension matters more here than anywhere, because a storage drawer that opens two-thirds hides a third of what is in it. Hinges are rated beyond 100,000 cycles and chosen in a corrosion-resistant finish for humid or semi-outdoor spaces.
Rockhampton Custom Cabinets

Storage is the most space-specific cabinetry there is, because the whole point is fitting a space nothing else fits.
The nearest IKEA store sits roughly 600km south near Brisbane, and the Kawana address is a click-and-collect collection point rather than a showroom with a planner. Storage built for an under-stair triangle or a 340mm gap cannot be ordered from a catalogue at any distance. A cabinet built in Rockhampton can be measured, built and if necessary remade within days. On a one-cabinet job, that is the entire difference.
Rockhampton Custom Cabinets measures, builds and installs the same storage, so the person who recorded the stair rake or the gap width is answerable for the fit. Most storage jobs install in a single day. Where a power point is wanted inside a cleaning cupboard or a garage cabinet, a licensed electrician is booked against the install, which in Queensland is a legal requirement.
Twelve years of cabinetry across Rockhampton covers the storage problems this city's housing creates: high-ceilinged linen cupboards in raised timber homes, under-stair voids in two-storey builds, and garages in new estates where the only free wall is above the car. Public liability cover is held to $20 million and the ABN is 56 573 390 615, both checkable. Board specification and hardware ratings are named in the written quote.


Rockhampton Custom Cabinets

Storage is usually the cheapest cabinetry a household will order, because most of it is shelving rather than doors and drawers. Published Australian guides give the frame below, quoted as that rather than as a Rockhampton measurement.
Four things move the price: the linear metres, how much is drawers or doors rather than open shelving, the finish, and whether the space is square or shaped. Open adjustable shelving is the cheapest thing a cabinetmaker builds. An under-stair run of graduated drawers is among the most expensive per metre, because every drawer is a different size. Converting an existing cupboard rather than building a new one is frequently the cheapest route to the same result.
Published Australian guides put custom joinery generally at roughly $800 to $2,000 per linear metre. For built-in floor-to-ceiling shelving specifically the same guides give about $1,400 to $2,400 per linear metre at a budget specification, $2,400 to $3,800 mid-range, and $3,800 to $6,500 for premium work, with the tiers reflecting build tolerance as much as material. Carpenter rates in Brisbane in those guides run $55 to $130 an hour, averaging about $85.
Doors and drawers are the cost; shelves are not. A linen cupboard fitted out with adjustable shelving is a modest job, and the same cupboard with internal drawers is several times it. After that comes the finish, then any electrical work. The cheapest honest advice on a storage job is usually to use open or shelved storage where it is not seen and spend the money on doors only where the cabinet is in a living space.
Rockhampton Custom Cabinets

Three honest options, and for a garage or a shed the cheapest two are often correct.
Built-in storage is the only option that fits a shaped space: an under-stair triangle, a 340mm gap, a sloping garage wall, the full height of a 3,000mm ceiling. It also uses the top 400mm that a freestanding unit leaves empty. It costs the most and is worth it where the space is awkward, where the storage is in a living area and has to look right, or where the full height matters.
Flat-pack shelving is a genuine budget option and is frequently the right answer in a garage, a shed or a laundry. Sizes are fixed, so a wall that is not a multiple of the unit width ends up with a gap, and the carcase specification is whatever the manufacturer chose. For a space nobody sees, that trade-off is sensible, and it gets recommended rather than argued against.
The cheapest storage there is: a run of open shelving, built or bought, with labelled plastic tubs on it. For seasonal items, camping gear and anything stored in a garage, it works well and keeps dust off the contents. What it does not do is suit a living space, use a shaped gap, or protect anything that matters from humidity. Where a household has a storage problem and a small budget, this is the honest first step and a cabinet can come later.


Rockhampton Custom Cabinets

A garage is usually the largest storage space in a Rockhampton house and the least organised. Four arrangements do most of the work.
A run of shelving along one garage wall, 400mm to 600mm deep and taken to the ceiling, holds more than any amount of stacking on the floor. The bottom shelf is kept off the slab so water from a wet car or a hosed floor cannot wick into it, and the shelving is specified in moisture-resistant board with sealed edges because a garage is effectively a semi-outdoor space. Closed cabinets at one end take the items that need to stay clean.
The space above a parked car is dead storage in almost every garage. An overhead platform or rack, fixed into the roof structure rather than the plasterboard, takes seasonal and bulky items that are needed twice a year. Height clearance is checked against the car with its boot open, not closed, because that is the real constraint. Loads are kept to what the structure is rated for, which is a question for the builder's plans rather than a guess.
Bikes, ladders, wheelbarrows and long tools are the things that make a garage unusable, and none of them belong on a shelf. A gear wall of slotted panel or a rail system puts them on the wall, off the floor, and keeps the slab clear enough to park on. Hooks are positioned from what the household actually owns, measured at the quote, because a bike hook at the wrong height is worse than no hook.
Camping gear, fishing rods, eskies and sports equipment come out a few times a year and take up space all year. Closed cabinetry keeps dust and insects off them, which in this climate matters more than it does further south. Tall bays suit rods and poles, deep shelves suit tubs and eskies, and a dedicated bay keeps a tent and its poles together, which is the only way either is ever found again.
Rockhampton Custom Cabinets

The best storage in most houses is in the spaces nobody has measured. Four of them come up repeatedly.
A hallway too narrow for a cupboard will usually take a 250mm or 300mm deep run along one wall, which is enough for linen, books, shoes or pantry overflow without obstructing the walkway. The run is taken to the ceiling, and doors are specified as sliders or push-to-open so nothing projects into the hall when opened. In a raised timber home with a long central hall, this is often the single largest storage gain available.
Under a raised timber home is the most under-used space in Rockhampton housing, and also the most demanding: it is semi-outdoor, subject to humidity, dust and insects, and sometimes to water. Cabinetry there is specified like outdoor joinery, with exterior-rated substrates, corrosion-resistant hardware and sealed edges throughout, and it is kept off the ground on legs rather than sitting on dirt or slab. Anything valuable is stored in closed, sealed cabinets.
In a small room the answer is almost always height and shallowness: a 300mm deep run taken to the ceiling stores more, and intrudes less, than a 600mm deep cupboard half as tall. A bed with drawers beneath it, a bench seat with storage under a window, and a shelf above a doorway each recover space the room was not using. Clothes storage in a bedroom is a different job and belongs with built-in wardrobes.
Every house has them: the 180mm beside a fridge, the 250mm at the end of a bench run, the 340mm between a door frame and a corner. Each one takes a pull-out: a spice or tray pull-out at 150mm, a pantry pull-out at 300mm, a shallow cupboard at 400mm. These are the cheapest custom cabinetry jobs there are and the most immediately useful, and they are the reason a measure beats a catalogue. Kitchen-side gaps are handled with the kitchen cabinetry itself.


The first visit is a free, no-obligation measure, recording the room as it actually is and working through how it needs to function. Older Rockhampton homes and Queenslander walls are rarely square, and a commercial tenancy is rarely handed over as drawn, so measuring on site is the only way to get it right. A clear design and a written, itemised quote follow, so the inclusions and the cost are known before anything is ordered. Nothing is built until the plan is approved.

Once the design is approved, the cabinets are made to measure in the Central Queensland workshop. Carcases are built in quality board, including HMR moisture-resistant board for kitchens, laundries, vanities and commercial wet areas, which is the sensible specification in a humid climate. Soft-close hinges and drawer runners are fitted as standard, with hardware such as Blum or Hettich. Everything is prepared and checked before it leaves the workshop for installation.

The same team that built the cabinetry delivers and installs it, so the people who made it are the people fitting it. Installation works cleanly and carefully around a household or a trading business, whether that is a full kitchen in Norman Gardens, a built-in wardrobe in Frenchville or a service counter that has to be in before opening. Benchtops, doors and drawers are aligned and adjusted on the day for a proper finish. The site is tidied before the team leaves.
Published Australian guides put custom joinery at roughly $800 to $2,000 per linear metre generally, and built-in floor-to-ceiling shelving at about $1,400 to $2,400 per linear metre at a budget specification, $2,400 to $3,800 mid-range and $3,800 to $6,500 for premium work. Open adjustable shelving sits at the bottom of that range and a run of graduated under-stair drawers near the top. Those are Australian figures rather than a measurement of this market, so a written quote after a free measure is the accurate number.
Yes, and it is usually the largest piece of dead space in a two-storey home. The practical answer is a set of graduated pull-outs: deep drawers at the tall end, shallower ones as the ceiling drops, and a hinged panel at the low end for long items. Each drawer is cut to the measured rake of the stair rather than a standard size, because no two staircases are built to the same pitch, which is why an off-the-shelf unit never fits.
About 450mm to 500mm, with shelf spacing of roughly 300mm to 350mm for folded towels and sheets. Deeper than that and the back half is never reached; shelves further apart than that and stacks topple. Adjustable shelving on 32mm increments lets the same cupboard be reset as a household changes. In this climate a vent in the door or a gap at the top also matters, because sealed linen storage is how stored fabric comes out smelling musty.
Yes. A garage in Rockhampton runs hotter than the house and swings further between wet and dry, so cabinetry there is specified with moisture-resistant board as a minimum, sealed edges throughout and corrosion-resistant hardware. The bottom shelf is kept off the slab so water from a wet car or a hosed floor cannot wick into it, and anything that matters is stored in a closed cabinet rather than on an open shelf, because dust and insects are as much of a problem as humidity.
Yes, and they are among the most useful work a cabinetmaker does. A 150mm tray pull-out beside a fridge, a 300mm pantry pull-out, a shallow cupboard in a 400mm gap, or converting an existing cupboard from one fixed shelf to four adjustable ones are all quoted per job after a measure. Converting what already exists is frequently cheaper than building new and solves the same problem, and that gets said rather than quoted around.
Yes, particularly in a garage, a shed or a laundry where nobody sees it. Flat-pack shelving at a lower price does the same job on a square wall, and open shelving with labelled plastic tubs is cheaper still and works well for seasonal and camping gear. Built-in storage earns its price where the space is shaped, where the full ceiling height matters, or where the cabinet sits in a living area and has to look like part of the house.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 7:00am - 9:00pm
Mon: 7:00am - 9:00pm
Tue: 7:00am - 9:00pm
Wed: 7:00am - 9:00pm
Thu: 7:00am - 9:00pm
Fri: 7:00am - 9:00pm
Sat: 7:00am - 9:00pm